Intercom - Panasonic KX-TGF380 Operating Instructions Manual

Making/Answering Calls Using the Base Unit
Note:
R Please contact your phone service provider for
details and availability of this service in your
area.
Temporary tone dialing for landline
calls (for rotary/pulse service users)
Press * (TONE) before entering access numbers
which require tone dialing.
Call share
You can join an existing outside call.
To select the line that is being used for the call:
– for a cellular line, press MCELL 1N or MCELL 2N,
then lift the corded handset.
– for the landline, lift the corded handset.
Note:
R A maximum of 3 parties (including 1 outside
party) can join a conversation. (3-way
conference)
R To prevent other users from joining your
conversations with outside callers, turn call
sharing mode off (page 43).
Transferring calls, conference calls
Outside calls can be transferred or a conference
call with an outside party can be made between a
handset and the base unit.
1
During an outside call, press MINTERCOMN.
When 2 or more handsets are registered:
MbN: Select the desired unit. a MSELECTN
R To page all handsets, press 0 or wait for a
few seconds.
2
Wait for the paged party to answer.
R If paged party does not answer, press
MINTERCOMN to return to the outside call.
3
To complete the transfer:
Place the corded handset on the cradle.
R The outside call is being routed to the
handset.
To establish a conference call:
Press MCONFN.
R To leave the conference, place the corded
handset on the cradle. The other 2 parties
can continue the conversation.
R To put the outside call on hold, press
MHOLDN. To resume the conference, press
MCONFN.
26
TGF38x(en)_1205_ver101.pdf 26
For assistance, please visit www.panasonic.com/support
Transferring a cellular call between
the base unit and a cellular phone
Transferring a cellular call from the base unit
to a cellular phone
1
Press MMENUN during a cellular call.
2
MbN: "Transfer to cell" a MSELECTN
R The cellular call is transferred to the cellular
phone.
3
Place the corded handset on the cradle.
Note:
R You can also press and hold MCELL 1N or
MCELL 2N to transfer a cellular call instead of
steps 1 and 2.
R Depending on your cellular phone type, you
may need to set the cellular phone to be ready
to talk before transferring. For example, if your
cellular phone has a top cover, open it
beforehand.
Transferring a cellular call from a cellular
phone to the base unit
During a conversation using a cellular phone,
press MCELL 1N or MCELL 2N, then lift the corded
handset.
R The cellular call is transferred to the base unit.
Answering a 2nd call
If you receive a call while talking on the phone, the
interrupt tone sounds (page 41) and the 2nd
caller's information is displayed if you subscribe to
Caller ID service (page 49).
Answering a 2nd call during a landline call
1
Press MHOLDN during a landline call.
2
To answer the 2nd call:
Press MCELL 1N or MCELL 2N.
3
To hang up the 2nd call and return to the 1st
call (landline call), place the corded handset
on the cradle, then lift it again.
Answering a 2nd call during a cellular call
1
Press MHOLDN during a cellular call.
2
To answer the 2nd call:
Place the corded handset on the cradle, then
lift it again.
3
To hang up the 2nd call and return to the 1st
call (cellular call), place the corded handset on
the cradle, then press MCELL 1N or MCELL 2N
and lift the corded handset.
2014/12/05 10:20:13