Answering Calls; Useful Features During A Call - Panasonic KX-TGF380 Operating Instructions Manual

1
9 a MDN (Pause)
2
Dial the phone number. a M
Note:
R A 3.5 second pause is inserted each time MDN
(Pause) is pressed.

Answering calls

1
Lift the handset and press M
the unit rings.
R To answer a cellular call, you can also press
MCELLN.
2
When you finish talking, press MOFFN or place
the handset on the charger.
Any key answer: You can answer the call by
pressing any dial key.
Auto talk: You can answer calls simply by lifting
the handset (page 42).
Temporary ringer off: You can turn the ringer off
temporarily by pressing M N.
Adjusting the handset ringer volume
Press MDN or MCN repeatedly to select the desired
volume while ringing.
Note:
R The ringer volume you set is kept for each line
(landline and cellular lines).

Useful features during a call

Hold
1
Press MMENUN during an outside call.
2
MbN: "Hold" a MSELECTN
3
To release hold on the cellular line:
*1
Press MCELLN.
R Another handset user can take the call by
pressing MCELLN.
*1 If you press MCELLN and the selection
list is displayed, select the desired
cellular line and press MSELECTN.
R The base unit user can take the call by
pressing MCELL 1N or MCELL 2N. a Lift the
corded handset.
To release hold on the landline:
Press M N.
For assistance, please visit www.panasonic.com/support
TGF38x(en)_1205_ver101.pdf 21
Making/Answering Calls Using the Handset
N
N or MZN when
*1
R Another handset user can take the call by
pressing M N.
R The base unit user can take the call by
lifting the corded handset.
Note:
R After holding for 10 minutes, the call is
disconnected.
Mute
1
Press MMUTEN during a call.
2
To return to the call, press MMUTEN.
Note:
R MMUTEN is a soft key visible on the display
during a call.
Flash for landline calls
MFLASHN allows you to use the special features of
your host PBX such as transferring an extension
call, or accessing optional telephone services.
Note:
R To change the flash time, see page 43.
For call waiting or Call Waiting Caller
ID service users
To use call waiting or Call Waiting Caller ID, you
must first subscribe with your phone service
provider.
This feature allows you to receive calls while you
are already talking on the phone. If you receive a
call while on the phone, you will hear a call waiting
tone.
If you subscribe to both Caller ID and Call
Waiting with Caller ID services, the 2nd caller's
information is displayed after you hear the call
waiting tone on the handset.
1
Press MCALL WAITN to answer the 2nd call.
2
To switch between calls, press MCALL WAITN.
Note:
R Please contact your phone service provider for
details and availability of this service in your
area.
2014/12/05
21
10:20:12