Hard Drive - HP ENVY m7 Maintenance And Service Manual

Hard drive

Description
1.5 TB 5400-RPM SATA RAW 9.5 mm
1-TB, 5400-RPM
1-TB, 5400-RPM hybrid
750-GB, 5400-RPM
750-GB, 5400-RPM hybrid
500 GB, 5400-RPM for use with HP ENVY 15 Notebook PC computer models
Hard Drive Hardware Kit for use with HP ENVY 15 Notebook PC computer models
Hard Drive Hardware Kit for use with HP ENVY 17 Notebook PC computer models
Before removing the primary hard drive or secondary hard drive (select models only), follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the optical drive (see
6. Remove the base enclosure and top cover (see
7. Remove the USB connector board (see
Remove the primary hard drive:
▲ Disconnect the hard drive cable from the system board (1), and then tilt the hard drive (2) and lift to
remove it (3).
62 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
Battery on page 37).
Optical drive on page
Base enclosure on page
USB board on page
38).
41).
61).
Spare part number
747375-005
778192-005
731999-005
778190-005
732001-005
778188-005
762504-001
763705-001