Panasonic CQ-C8405U Operating Instructions Manual page 60

Be sure to read "Safety Information" in the Operating Instructions for the Hands-Free Phone System before use
20
=
o
. -
...
ca
..
c a
CL
CD
..
ca.
I
it
=
o
.-
...
!
CD
CL
o
Connect the Hands-Free Phone System (CY-BT1 aaU) and
establish the pairing. Refer to the operating instructions
for the Hands-Free Phone System for further information.
Note:
This unit is designed
only for receiving calls.
It cannot send calls.
1
Press [Hang-on] on the Bluetooth
hands-free kit and pick up the phone.
The phone is in the incoming state.
2
Adjust the volume if necessary.
3
Press [Hang-up] on the Bluetooth
hands-free kit and hung up the phone.
Adjust the ring volume
The ring volume is adjustable from this unit.
(Setting range: OFF/LOW/MID/HIGH, Default: MID)
[1\]:
up
[V]:
down
Notes:
'" The ring volume is adjustable only when receiving
calls.
~ The ring volume is adjustable only when the phone
ring comes out of the main unit.
4'
The ring volume is also adjustable by turning
[VOL].
Switch Unit
, - - - - - Status indicator (Blue LED)
Lights: Call waitingrralking
Stays out: Not connected
Blinks rapidly: Receiving a call
Blinks slowly: Pairing/Reconnecting
[Hang-onllBlue LED
[Hang-uplIRed LED
Reject calls
Pressing [Hang-up] allows users to reject a call when
the call is coming in.
Pressing
[Hang-up]
allows users to temporarily
disconnect when the phone is in the waiting state.
Pressing [Hang-up] allows users to reconnect when the
Bluetooth unit is temporarily disconnected.