Deleting All Configured Printers; Figure 4-4 Expanding Detected Printers Information - Lantronix xprintserver User Manual

5. Expand the SNMP field to see configuration information about the discovered printer(s). An
example of what you may see in the SNMP field:
6. Expand the Detected Printers field and further expand additional available subcategories
(indicated with a
provisioning results.
Note: If you expand the Printer Auto Discovery Report, you may need to use the left-right and
up-down scroll bar to see the entire contents of your report.

Deleting All Configured Printers

The auto discovery utility of the xPrintServer device is enabled by default so that whenever you
turn on your xPrintServer device, auto discovery will automatically run one time.
1. Login to the xPrintServer device's Admin interface (see
2. Click the Printer tab to access the Printers > List page (see
3. Click the Discovery link to the left of the page to reach the Printer Discovery page.
4. Click the Remove all printers button to remove all configured printers, as desired.
5. Click Yes in the confirmation popup that appears.
6. Log-off (see
7. Click the Home tab to access the System Status page (see
Information on the Home
8. Click From Google's Website to access the Google Cloud Print management page (see
Supplementary Google Cloud Print Administrative
9. Verify all printers have been de-registered by going into the Google Cloud Print management
page and deleting any leftover printers from the previous xPrintServer device registration.
Lantronix® xPrintServer® User Guide

Figure 4-4 Expanding Detected Printers Information

icon to the left) to see a list of discovered printers and the status of the
Logging Off) and close your browser. All printers are deleted.
Page.)
Logging In.)
Figure 4-1.)
Figure 3-3 IP System Status
Features.)
4: Configuration
39