Adding A New User; Figure 4-28 Changing Other User Passwords (Admin User Only) - Lantronix xprintserver User Manual

To change a non-Admin user password as the Admin:
1. Login to the xPrintServer user interface as Admin user (see
2. Click the Users tab to access the Users page. All users are listed here.
3. Utilize Search
4. Click Password button to the right of the User ID to be changed.
5. Enter the new password into both fields:

Password

Re-enter Password
6. Click Change Password.
7. Click OK in the confirmation popup that appears. User password is changed.
Note: If the Admin user password is changed, you will be asked to login again if you attempt to
navigate to a different user interface page.

Adding a New User

The Admin user can use these steps to create new users.
1. Login to the xPrintServer user interface as Admin user (see
2. Click the Users tab to access the Users page. All users are listed here.
3. Click Add User...
Note: The Full Name of a new user is case sensitive and may include up to 32 alpha and/or
numeric characters.
4. Enter the following fields for the new user:

Username

Password

Re-enter Password

Full Name

GCP Account
5. Click Add User (or Cancel if you want to cancel this action.) The new user will immediately
display on the Users page.
Lantronix® xPrintServer® User Guide
as necessary to find a particular user.

Figure 4-28 Changing Other User Passwords (Admin User Only)

Note:
that the iOS device browser capitalizes the first
character of the User ID. Make sure the User ID is
correct prior to submitting your request to add user.
Logging
Note: Passwords are case-sensitive and
may include up to 32 characters. All
printable characters maybe used with the
exception of single and double quotation
marks such as: ' or ".
Logging
When establishing a new user, please note
In.)
In.)
67