Deleting A User; Exporting Users; Figure 4-29 Adding Or Deleting A User (Admin User Only); Figure 4-30 Exporting Users - Lantronix xprintserver User Manual

Deleting a User

The Admin user can use these steps to delete users.
1. Login to the xPrintServer user interface as Admin user (see
2. Click the Users tab to access the Users page. All users are listed here.
3. Utilize Search
4. Click the Delete button to the right of the User ID to be deleted.
5. Click Yes in the confirmation popup that appears (or No if you want to cancel this action.) .
The deleted user will immediately be removed from the list of users on the Users page.

Exporting Users

The Admin user can use these steps to export users. The user information is exported as a CSV
file that can be saved to specific chosen location (e.g., a flash drive or a designated place on the
hard drive.) This user information can then be imported into other xPrintServer units. See
Importing Users
1. Login to the xPrintServer user interface as Admin user (see
2. Click the Users tab to access the Users page. All users are listed here.
3. Click the Export Users button. A file name with user information appears at the bottom left
corner of the screen as a button. The name of this file will be xps-users.csv by default.
This file will contain the username, full name, password, GCP Account and Admin information
of all non-Admin users. See
Lantronix® xPrintServer® User Guide

Figure 4-29 Adding or Deleting a User (Admin User Only)

as necessary to find a particular user.
below for directions as necessary.
Figure 4-30

Figure 4-30 Exporting Users

Logging
Logging
below.
In.)
In.)
68