4: Configuration; Viewing Configured Printers; Figure 4-1 Printer Details And Pop-Up Command Menu - Lantronix xprintserver User Manual

4: Configuration

This chapter describes how to configure your Lantronix xPrintServer device using the
xPrintServer device's Admin interface.

Viewing Configured Printers

Utilize these instructions to view provisioned network-connected printers. These include printers
installed since the xPrintServer last started up or any newly added printers on other networks
(see Adding a Printer IP
1. Login to the xPrintServer device's Admin interface (see
2. Click the Printers tab to access the Printers > List page. The Description, Location,
Make/Model, the last known Status of all currently configured printers, and Cloud Enabled
status will be listed on this page.
3. Utilize Navigation
4. Utilize Search
5. Click on any printer in the list to retrieve additional information on that printer. In
below, the second printer in the list was clicked and the associated printer details displayed in
a grey field at the bottom of the list of printers.
Description
Printer Driver
URL
6. Click the
options available for that printer (see
greater detail under
Lantronix® xPrintServer® User Guide
Address.)
as necessary in situations where there are multiple pages of printers.
as necessary to find a particular printer.

Figure 4-1 Printer Details and Pop-Up Command Menu

button to the right of a specific printer to access a pop-up command menu of
Admin Printer Configuration
Logging
Figure 4-1.) Each of these options is explained in
Options.
In.)
Figure 4-1
Location
Print Status
Cloud Print
Connection Status
35