Jayco 2016 Jay Series Owner's Manual page 116

SECTION 14 – SETUP & MAINTENANCE
Step 2
Unhook the roof latches (one on each side of
the unit).
Step 3
Standing on the door side, position
yourself on the left (rear) side of the
entrance door. Firmly grasp the roof
and lift up until the roof locks into
place. Make sure the roof is securely
locked in place before proceeding.
 NOTE: Having a second
person on the opposite side of
the unit make set up easier.
CAUTION
Make sure the roof is securely
locked into position. Proceeding
with set up without the roof
securely locked into place may
result in property damage or
personal injury.
Step 4
Open the bottom section of the door. Next, flip up the top section of the door
enough so you can step inside the unit. Holding the door in the open position, lift
up the (door) side wall. Be sure to line the top half and the bottom half of the
entrance door up as you lift the wall into place.
14-2
JAYCO HARD WALL MODELS
SCT HS