28
en | Installation Wireless Devices and Accessories
When installing more than one Charger next to each other, be sure that:
–
–
d
1
Mains power supply connection / loop‑through
1.
2.
2015.03 | V1.01 |
The vertical distance between two brackets is at least 340 mm (refer to d1 in the next
figure).
The horizontal distance between two brackets is at least 195 mm (refer to d2 in the next
figure).
d
2
Connect a locally approved mains power cord to the Charger mains power supply socket/
inlet (5).
With the loop‑through mains power supply socket (6), you can loop‑through chargers:
–
If the mains power supply is 100‑127 V(AC), 50/60 Hz, a maximum of 2 chargers can
be looped‑through.
–
If the mains power supply is 220‑240 V(AC), 50/60 Hz, a maximum of 5 chargers can
be looped‑through.
Installation Manual
DICENTIS
Bosch Security Systems B.V.