Where To Find The Controls; Controls, Vitotronic 200; How To Use The Controls, Vitotronic 200 - Viessmann Vitotronic 200 Operating Instructions Manual

Vitotronic 200 Operating

Where to Find the Controls

Controls, Vitotronic 200

Vitotronic 200, type HO1B

How to Use the Controls, Vitotronic 200

In multi boiler systems, each Vitotronic 200 indicates
the boiler number on the standard display. The following
example shows the boiler water temperature as indicated
by boiler 4.
Press .
This takes you to the menu for settings and scanning.
Note: If a boiler is not in operation, the following appears
in the display of the corresponding control unit:
Off
Each boiler is equipped with its own control unit for
constant temperature operation.
These control units are regulated by a higher weather-
compensated cascade control unit.
H Control unit in constant temperature mode on the boiler:
Vitotronic 200
 T akes you to the previous step in the menu or cancels
a setting that has been started.
Cursor keys
To scroll through the menu or to set values.
OK Confirms your selection or saves the setting.
No function.
?
Enables you to call up the menu for settings and
scanning.
Symbols
These symbols are not always displayed, but appear
subject to the system version and the operating state.
Flashing displays indicate that modifications can be made.
Menu
Information
Further adjustments
S Emissions test mode
Heating program
Standby mode with frost protection monitoring
9
The boiler is available to the cascade control unit
for heat production.
Messages
Service message

Fault message
Burner fault
E
Displays
Circulation pump at output 20 is running
p
A Burner in operation
Factory settings
D
Operation
7