Sterndrive & Transmission Maintenance Schedule - Hyundai Seasall S270S Series Installation & Operation Manual

INSTALLATION & OPERATION MANUAL
3. STERNDRIVE & TRANSMISSION MAINTENANCE SCHEDULE
Maintenance
item
Check sterndrive unit oil level (Transmission)
Trim pump oil level
Steering fluid level
Check water pickups for debris or marine growth
Check water strainer and clean
Inspect sterndrive unit anodes and replace if 50% eroded
Lubricate propeller shaft and the retorque nut
Touch-up power package paint and spray with Corrosion Guard
(Transmission)
Change sterndrive unit oil (Transmission)
Retorque connection of gimbalring to steering shaft
Check steering system and remote control for loose, missing or
damaged parts
Lubricate cables and linkages
Inspect U-joints, splines and bellows. Lubricate U-joints splines
Check engine alignment
Check gimbal bearing and engine coupler
Check continuity circuit for loose or damaged connections
Check MerCathode unit
Filter replacement (ZF Transmission)
1) The first replacement must be preformed after 25 hours of operation.
2) The oil must be changed whenever the filter is replaced.
S270 Series Engines
YOU SHOULD EXERCISE THE UTMOST CARE TO PREVENT INJURY
TO YOURSELF OR ENGINE DAMAGE WHENEVER PERFORMING
ANY MAINTENANCE.
Maintenance
intervals
CAUTION
- 69 -
Whichever comes first
100h /
Daily
1year
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●