Neutral Switch And Dual Eoi Connection - Hyundai Seasall S270S Series Installation & Operation Manual

INSTALLATION & OPERATION MANUAL
CN8 (KEY BOX)
1. Ignition power
2. Start power
3. Permanent power

4. NEUTRAL SWITCH AND DUAL EOI CONNECTION

1) Neutral switch wires should be connected at pin #4 and #5 of the external connector
of the EOI. If there is no neutral switch, jumper #4 and #5 with short wiring.
SYSTEM WITH A NEUTRAL SWITCH
1
4
From neutral switch wiring
2) If there is a dual EOI, you should connect the wiring between #5 (external connector of
the main EOI) and #5 (external connector of the dual EOI)
Main EOI external connector
1
4 5
From neutral switch wiring
S270 Series Engines
3
1
5
8
8
FOR USER'S SAFETY, ENGINE WILL NOT CRANK OR START IF GEAR
POSITION LEVER IS NOT IN NEUTRAL OR NOT CONNECTED TO THE
EOI EXTERNAL CONNECTION.
SYSTEM WITH NO NEUTRAL SWITCH
4
Dual EOI external connector
4 5
CAUTION
- 50 -
19
IG_POWER
30
START
BATT
5
Jumper