Volume; Mute; Join A Call In Progress; Call Waiting - VTech CS6929 User Manual

Volume

During a call, press
adjust the listening volume.
NOTES
• The handset and speakerphone volume
settings are independent.
• When the volume reaches the minimum
or maximum setting, you hear two beeps.

Mute

The mute function allows you to hear
the other party but the other party
cannot hear you.
• During a call, press MUTE. The
handset displays Muted until the
mute function is turned off.
Press MUTE again to resume the
•
conversation. The handset briefly
displays Microphone on.

Join a call in progress

You can use up to two system handsets
at a time on an outside call.
• When a handset is already on a call,
press or
join the call.
• Press OFF or place the handset
in the telephone base or handset
charger to exit the call. The call
continues until all handsets hang up.
NOTE
• If you have paired a DECT 6.0 cordless
headset and speakerphone to the
telephone base, you can also join a call
in progress using the paired device. Refer
to the user's manuals of the respective
product for more information.
to
/VOLUME/
on another handset to

Call waiting

When you subscribe to call waiting
service with your telephone service
provider, you hear an alert tone if there
is an incoming call while you are on
another call.
Press FLASH to put the current call
•
on hold and take the new call.
Press FLASH at any time to switch
•
back and forth between calls.
If you also subscribe to caller ID
service, it will let you see the name and
telephone number of the caller during
call waiting.
It may be necessary to change your
telephone service to use this feature.
Contact your telephone service provider
if:
• You have both caller ID and call
waiting, but as separate service (you
may need to combine these service);
• You have only caller ID service, or
only call waiting service; or
• You do not subscribe to caller ID or
call waiting services.
There are fees for caller ID services. In
addition, services may not be available
in all areas.

Chain dialing

Use this feature to initiate a dialing
sequence from numbers stored in the
phonebook, caller ID log or redial list
while you are on a call.
Chain dialing can be useful if you wish
to access other numbers (such as bank
account numbers or access codes)
from the phonebook, caller ID log or
redial list.
13