Table of Contents
Advertisement
TRENDnet User's Guide
The scan speed can be set from level 1 to 40.
Max. Tilt-angle:
The maximum angle that the camera can revolve in
the tilt direction is adjustable. The values range
from (0-90) to (-5-90)
Auto Flip:
You can enable/disable the auto flip function
PTZ OSD
Zoom Status:
Set the OSD duration of zooming status as 2
seconds to 10 seconds, always on or off.
PT Status:
Set the angle display duration white panning and
Preset Status:
Set the preset name display duration as 2 seconds
to 10 seconds, always on or off.
POWER OFF MEMORY
Set Resume Time Point:
The camera can resume its previous PTZ status or
actions after it is restarted from a power-off. You
can set the time point of which the camera resumes
its PTZ status from 30 seconds up to 600 seconds
before power-off.
Click Save to save the changes
© Copyright 2015 TRENDnet. All Rights Reserved.
tilting as 2 seconds to 10 seconds, always on or
off.
Limit
The camera can be programmed to move within the configured stops. (left, right, up or down)
Steps
1.
Check the Enable Limit box and select Manual Stops or Scan Stops from the Limit
Type list.
a.
When manual limit stops re set, you can operate the PTZ control panel
manually only in the limited area.
b. When scan limit stops are set, all the scan actions are performed only in
the limited area.
2.
Click the PTL control buttons to find the left/right/up/down stop limits, you can also
call the presets and set them as the limits for the camera.
3.
Click Set to save the limits and Clear to clear the limits.
TV-IP430PI
47
- Quick Links:
- Restore Default Password
Hide quick links:
Advertisement
Table of Contents
