Page 1
BaTTEry CHarGer T4X SE T4X SE Battery Charger Operation and Safety Notes...
Page 2
Before reading, unfold the page containing the illustrations and familiarise yourself with all functions of the device. GB / IE / CY Operation and Safety Notes Page...
Component description Proper Use see Fig. A: LED display (standby) The TRONIC T4X SE is a battery charger with a „6 V“ LED display „Mode 1“ pulse trickle charge mode and is suitable for charg- LED display „Mode 2“ ing and maintenance charging of the following 6 V LED display „Mode 3“...
Introduction / Safety DAngEr OF ElECTrIC ShOCk! Do not „–“-Pole quick-contact terminal (black), incl. black fixing screw operate the vehicle if you are charging a battery while it is still in the vehicle! Switch off the igni- tion and park the vehicle. Apply the parking Technical Data brake (e.g.
Page 7
Safety supervision or instruction by a person responsi- 230 V ~ 50 Hz, PEN conductor, a 16 A fuse ble for their safety. and a residual-current circuit-breaker! Other- EXPlOSIOn hAzArD! wise the device could be damaged. Protect yourself from a high- Do not place the battery charger near fire, heat, ly explosive oxyhydrogen gas or subject it to prolonged temperatures of over...
Safety / Operation and do not use the battery charger if you can- Then disconect the plus pole connecting cable not concentrate or feel unwell. (red) of the vehicle from the plus pole of the battery. First attach the „+“ quick-release clamp (red) Product features of the battery charger to the „+“...
Operation reset / deleting settings Mode 2 „12 V“ (14.4 V / 0.8 A) After connection to the power supply, the appliance This mode is suitable for charging 12 V lead-acid automatically returns to its basic setting and remains batteries with a capacity less than 14 Ah. in STANDBY mode Press the selection button MODE , to activate...
If the appliance becomes too hot during charging, mediately. If you take no further action, the elec- the power output is automatically reduced. This tronic control switches on after a preset delay protects the appliance from damage. to begin the charging process. In this mode the charging current is the same as in “mode 3”.
Warranty / Disposal The warranty covers only material or manufactur- By doing this you will be complying with the legal ing faults, not normal wear or damage to fragile requirements and making an important contribution parts such as switches or rechargeable batteries. to protecting the environment.
EC low-Voltage Directive (2006 / 95 / EC) Electromagnetic Compatibility (2004 / 108 / EC) Product designation: Battery charger T4X SE Tronic Bochum, 30.06.2009 Hans Kompernaß - Managing Director - We reserve the right to make technical modifications in the course of product development.