Foscam C1 User Manual page 48

click on the IP address, and click on "Network Configuration", this brings up the network configuration
box as flowing figures.
Step 2: Enter the username and password of the Administrator (default username is admin with a blank
password), and click "OK" to apply changes.
Step 3: Wait around 10 seconds, you'll see that the camera's LAN IP address has changed. In our
example it was changed to 2000, so we see http://192.168.1.110:2000 in Equipment Search Tool. Also,
the LAN IP address is now fixed at a static IP address of http://192.168.1.110:2000. This IP address will
not change even if the camera is powered off and back on, the camera will remain on this LAN IP
address. This is very important that a static LAN IP address is set, or you may have problems later with
remote access and seeing the camera remotely if the camera loses power and reconnects on a different
LAN IP address. Make sure you set a static LAN IP address!
Select which camera
you'd like to change the
port for, and right click .
Figure 4.1
Figure 4.2
Modify the Http Port .
Enter the Username and
password, click OK.
47