Panasonic KX-TAW848 Installation Manual page 69

4. Finish the site survey
Refer to "2.7.6 After Site Survey".
a.
Return all DIP switches of each CS to the OFF position, and stop supplying power.
b.
Turn off the PS.
5. Connect the CS and PS to the PBX and test the operation
Refer to "2.7.7 Connecting a Cell Station to the PBX".
a.
Connect the CSs to the PBX.
b.
Register the PSs to the PBX.
c.
Walk around the service area while having a conversation using a registered PS. If
noise is frequent or conversations disconnect, relocate the CSs or install additional
CS.
6. Mount the CS on the wall
Refer to "2.7.8 Wall Mounting".
a.
Assuming everything goes as planned, mount the CS on the wall.
2.7 Connection of 2.4 GHz Portable Stations
Installation Manual 69