Panasonic KX-TAW848 Installation Manual page 107

3.3 Installation of the PC Programming Software
1. Connect the PC to the PBX with a USB cable.
2. Click "Start"
"Programs"
"KX-TAW848 Maintenance Console"
"KX-TAW848 Maintenance Console".
3. Type the Installer Level Programmer Code
(default: INSTALLER), then click [OK].
The Programmer Code authorizes different
programming levels, and the Quick Setup is
only available when you start the KX-TAW848
Maintenance Console with the Installer Level
Programmer Code.
Note
There are 2 other Programmer Codes
with limited authorization: Administrator
Level (default: ADMIN), and User Level
(default: USER).
4. Click "Connect"
"USB" from the menu bar.
Note
To connect to the PBX via USB, the KX-
TDA USB driver must be installed on the
PC, as explained above in "Installing the
KX-TAW848 Maintenance Console".
5. Type the system password for installer
(default: 1234), then click [OK] to log-in.
6. Follow the instructions of the wizard and
assign the basic items (Quick Setup).
Installation Manual 107