Mounting on Concrete or Mortar Wall
CAUTION
Drive mounting screws into the wall. Be careful to avoid touching any metal laths, wire
laths or metal plates in the wall.
1.
Place the reference for wall mounting on the wall to mark the three screw positions.
2.
Install three anchor plugs (user-supplied) in the wall.
Hammer
Anchor Plug
3.
Install the screws (included) in the wall.
Drive the screw
to this position.
4.
Hook the main unit on the screw heads.
130 mm (5.1 in)
250 mm
(9.8 in)
6.4 mm
(1/4 in)
29 mm
(1-1/8 in)
2.2 Installation of the PBX
Installation Manual
45