3.3 Installation of the PC Programming Software
3.3.4
PBX Maintenance
This section briefly describes how to perform maintenance of the PBX using the KX-TAW848
Maintenance Console when PC and the PBX are connected by USB cable.
For detailed descriptions of each feature and related PT programming, refer to the on-line help
at each screen.
112
Installation Manual
1. Start the KX-TAW848 Maintenance Console
(refer to "Starting the KX-TAW848
Maintenance Console and Assigning the
Basic Items (Quick Setup)" in "3.3.1 Installing
and Starting the KX-TAW848 Maintenance
Console").
2. To diagnose a card:
Click "Utility"
"Diagnosis" from the menu
bar.
3.
a.
Click "Status" of the desired card and
change its status to "OUS".
b.
Click "Card Type" of the desired card.
The diagnosis screen appears.
To use other utility commands, click the
desired item in the step 2 above.