Honeywell T7350 User Manual page 15

Grouping Button
Information Down Arrow
Information
Up Arrow
Temperature Occupied
Heat
Occupied
Cool
Not
Occupied
Heat
Not
Occupied
Cool
Set Day
Time
Override Temporary
Occupied
Temporary Not
Occupied
Schedule Day
Occupied
Not Occupied
Clear
Start Time
Copy
System
Fan
Run Schedule
a
Fan On: Continuous fan operation during occupied periods. During not occupied and standby periods, fan cycles with call for heat
or cool.
Fan Auto: Fan cycles with call for heat or cool during all periods. (See Fan Settings section for more details.)
NOTE: The display returns to the default screen after pressing Run Schedule (or after a period of time without keypress):
— ten seconds: when returning from temporary setpoint changes, info screen, temp occ, and temp not occ.
— one minute: when returning from setting clock/day.
— ten minutes: when returning from System Checkout.
— five minutes: when returning from all other modes.
Table 11. T7350 Key Function Summary.
Lowers setpoint, day, or time. When setting times or temperatures, hold key down to

continuously decrease value. Also can make temporary change in temperature setpoint.
Obtains information (where humidity "high-limit" can be set), cycles through setup options.
Raises setpoint, day, or time. When setting times or temperatures, hold key down to

continuously increase value. Also can make temporary change in temperature setpoint.
Sets Occupied Heat setpoint.
Sets Occupied Cool setpoint.
Sets Not Occupied Heat setpoint.
Sets Not Occupied Cool setpoint.
Sets day of week. Tapping key with 'Set Value' segment on increases current day (same
effect as Up Arrow key).
Sets time.
Tapping key with "Set Value" segment on increases time in one hour increments.
Temporary occupied setting for length of time defined by installer.
User can modify setpoints.
Sets holiday length.
User selects number of days ("0"-"99"), or "---" for continuous override.
Selects day schedule to modify. (Used also with copy key.)
Selects occupied event start times for specified day.
Repeatedly press this key to toggle between two occupied events.
Selects not occupied event start times for specified day.
Repeatedly press this key to toggle between two not occupied events.
Clears start time for specified period and day.
Copies schedule from one day to another.
Selects System Mode. Toggles through Em Heat, Heat, Off, Cool, and Auto modes.
Selects fan operation mode. Toggles between On and Auto.
Resumes running schedule.
Cancels Temporary (Not) Occupied action, and/or Temporary setpoint changes.
T7350 COMMERCIAL PROGRAMMABLE THERMOSTAT
Definition
15
a
63-2605—09