Honeywell T7350 Features
  1. Manuals
  2. Brands
  3. Honeywell Manuals
  4. Thermostat
  5. WebStat T7350
  6. Features

Honeywell T7350 Features

For conventional/heat pump systems
Hide thumbs Also See for T7350:
Table of Contents

Advertisement

Quick Links

See also: Product Data , User Manual
® U.S. Registered Trademark
Copyright © 2003 Honeywell International Inc.
All Rights Reserved

Programmable Thermostat

FOR CONVENTIONAL/HEAT PUMP SYSTEMS
Features ...........................................................................
Settings ............................................................................
Programming ...................................................................
T7350
Contents
2
3
5
63-2604

Advertisement

Table of Contents
loading

Related Manuals for Honeywell T7350

Summary of Contents for Honeywell T7350

  • Page 1: Programmable Thermostat

    T7350 Programmable Thermostat FOR CONVENTIONAL/HEAT PUMP SYSTEMS Contents Features ................Settings ................Programming ..............® U.S. Registered Trademark Copyright © 2003 Honeywell International Inc. All Rights Reserved 63-2604...
  • Page 2 FEATURES • Intelligent Fan™ feature energizes fan continuously in the Occupied periods. Fan can also be configured for conventional • Typically used in buildings (including: heat or electric heat fan operation. restaurants, shopping malls, office • Remote sensor capability for temperature buildings and banks) under 55,000 (including outdoor air and discharge air) square feet.

  • Page 3: Setting Temperature

    SETTINGS • Auxiliary subbase contact typically interface with a Honeywell Economizer System (for total rooftop control Using Thermostat Keys integration) or act as dehumidification output. The thermostat keys are used to: Features Available via PDA • set current time and day, •...

  • Page 4: System Settings

    System Settings Table 1. Default Setpoints. — Auto: Thermostat automatically changes Control Occupied Not Occupied Standby between heating and cooling based on Heating 70°F (21°C) 55°F (13°C) 67°F (19°C) sensed indoor temperature. Cooling 75°F (24°C) 85°F (29°C) 78°F (26°C) — Cool: Thermostat controls cooling. —...
  • Page 5 PROGRAMMING IMPORTANT Programming the thermostat with the keypad requires 24 Vac (turn on The thermostat operates at the Occupied system power). The keyboard lockout temperature setting unless the thermostat is feature must be disabled. programmed. The program has four settings: —...
  • Page 6 Table 2. Occupied and Not Occupied Period Start Times. Occupied Period 1 Not Occupied Period 1 Occupied Period 2 Not Occupied Period 2 Monday Tuesday Wednesday Thursday Friday Saturday Sunday NOTE: 12:00 PM is Noon, and 12:00 AM is Midnight. 63-2604...
  • Page 7 Temperature Set Day/Time Override Temporary Temporary Occupied Not Occupied Occupied Not Occupied Time HEAT COOL HEAT COOL Schedule System Clear Schedule Occupied Not Occupied Start Time Copy ON AUTO HEAT COOL M19610BB Fig. 1. Thermostat key locations. When using the keypad to change the day/time: 2.

  • Page 8: Copying A Day

    Setting Schedule Times NOTE: The thermostat must be in program mode to use the copy feature. If the Use the keys in the “Schedule” area of the thermostat is already in program keypad for this procedure. mode, skip step 1. 1.

  • Page 9: Temperature Setpoints

    Clearing Program Start Times NOTES: The ranges mentioned can be limited based upon setpoints and stops: 1. Press Occupied or Not Occupied until the The greater of the Minimum Heat start period to be cleared is displayed. Stop and the Not Occupied Heat set- 2.
  • Page 10 A T7770 setpoint knob can remotely adjust the 9. Press Run Schedule. T7350 setpoint. This adjustment can be made when the sensor is in override. NOTES: — During override, only occupied and standby heat setpoints, and cool setpoints are adjusted.
  • Page 11 (between 1 and 99) without The Temporary Occupied Override can be used changing the programming saved in memory. when the T7350 is in Not Occupied or Standby mode. It switches to the Occupied mode for a NOTES: fixed number of hours.
  • Page 12 Not Occu- approximately ten seconds, then the pied setpoint. room temperature is displayed. Automation and Control Solutions Honeywell International Inc. Honeywell Limited-Honeywell Limitée 1985 Douglas Drive North 35 Dynamic Drive Golden Valley, MN 55422 Scarborough, Ontario M1V 4Z9 Printed in U.S.A.

Table of Contents