Advertisement
14. Re-route the internal speaker cable that was removed in step 2 and reconnect to
connector 9B, located just under the external speaker jack at the rear of the radio.
15. Replace top and bottom covers and replace 4 Philips case screws and the Torx
screws removed from around the rear perimeter of the case.
16. After re-connecting DC power to the transceiver, turn transceiver front panel power
switch to ON, and enter the transceiver menu. There is a line item marked
AUTOTUNER which must be turned to ON to actuate the tuner. Tuner operation
instructions are provided in the Omni-VII owners manual.
Ten-Tec part #74431
Version 1 – February 2009
Advertisement
