Honda HSS724A Owner's Manual page 12

INITIAL USE INSTRUCTIONS
ADD ENGINE OIL
The snow blower is shipped WITHOUT OIL in the engine.
1.With the snow blower on a level surface, remove the oil filler cap/
dipstick.
2.Add oil from the included bottle of oil into the oil filler opening to the
top of the filler opening (upper limit).
All Honda engines are run at the factory prior to packaging. Most of
the oil is removed prior to shipment; however, some oil remains in
the engine. The amount of oil left in the engine varies.
3.If you don't use the supplied oil, add enough recommended oil
(page 45) to bring the oil level to the top of the oil filler opening.
4.Do not overfill the engine with oil. After filling the engine with oil,
screw the filler cap/dipstick in and remove the hang tag near the
recoil starter grip that says "The engine has no oil".
10
OIL FILLER CAP
UPPER LIMIT