Auto-Off; Auto-Start; Setting The Temperature; Energy Saving - DeLonghi ECAM22.360 Instructions For Use Manual

Auto-off

Auto-off can be set so that the appliance goes off after 15 or 30
minutes, or after 1, 2 or 3 hours.
1. Press the MENU button to enter the menu;
2. Press the or button until "Auto-off" is displayed;
3. Press the button;
4. Press the or until the number of hours of opera-
tion is displayed (15 or 30 minutes, or 1, 2 or 3 hours);
5. Press the button to confirm.
The auto-off is set. Press MENU to exit menu.

Auto-start

you can set the auto-start time in order to have the appliance
ready at a certain time (for example in the morning) so you can
make coffee immediately.
Please note :
To enable this function, the time must already be set correctly.
1. Press the MENU button to enter the menu;
2. Press the or
played;
3. Press the button. "Enable?" is displayed;
4. Press the button to confirm;
5. Press the or
6. Press the button to confirm;
7. Press the or
8. Press the button to confirm;
9. Then press MENU to exit menu.
Once the time has been confirmed, activation of auto-start is
indicated by the symbol displayed alongside the time and
under "Auto-start" in the menu.
To disable the function:
1. Select auto-start from the menu;
2. Press the button. "Disable?" is displayed;
3. Press the button to confirm.
The symbol is no longer displayed.

Setting the temperature

If you want to modify the temperature of the water used to
make the coffee (low, medium, high, maximum), proceed as
follows:
1. Press the MENU button to enter the menu;
2. Press the or
displayed;
3. Press the button;
4. Press the or
ture is displayed (low, medium, high, maximum);
5. Press the button to confirm.
The temperature is set. Press MENU to exit menu.
button until "Auto-start" is dis-
button to choose the hour;
button to change the minutes;
button until "Set temperature" is
button until the required tempera-

Energy saving

Use this function to enable or disable energy saving.
When enabled, the function reduces energy consumption in
compliance with European regulations.
When energy saving mode is active, an asterisk appears below
"Energy saving" in the menu.
1. Press the MENU button to enter the menu;
2. Press the or
played;
3. Press the
played;
4. Press the button to enable or disable energy saving
mode;
Then press MENU to exit menu.
When the function is active, if the machine is not used for
about 1 minute, "Energy saving" is displayed.
Please note :
When in energy saving mode, a few seconds may elapse be-
fore the first coffee is delivered as the appliance must heat up
again.

Setting water hardness

For instructions on setting water hardness, see page 16.

Setting the language

To modify the language on the display, proceed as follows:
1. Press the MENU button to enter the menu;
2. Press the or
played;
3. Press the button;
4. Press the or
is displayed ;
5. Press the button to confirm;
The language is set. Press MENU to exit menu.

Install filter

For instructions on how to install the filter, see the section "In-
stalling the filter" (page 16).

Remove filter

For instructions on how to remove the filter, see the section
"Installing the filter" (page 16).

Replace the filter

For instructions on how to replace the filter, see the section
"Replacing the filter" (page 17).

Default values (reset)

This resets all menu settings and programmed quantities back
to the default values (with the exception of the language
10
button until "Energy saving" is dis-
button. "Enable?" or "Disable?" is dis-
utton until "Set language" is dis-
button until the required language