Clarion EA-2182E Owner's Manual And Installation Instructions page 20

Camera linkage
1) The camera image to be displayed can be set in the Link (TRIGGER terminal) 1 - 4.
① Select Link 1 - 4 or Link 2+3 with the ▲／▼ buttons in the Camera linkage menu, and press the
ENT(VOL) button (OK or ▶ button on the remote control).
② Select the screen when linked with the ▲／▼ buttons, and press the ENT(VOL) button (OK or ▶ button
on the remote control).
※ The 2 - 4 split screen display will be the screen set in the Split type display settings.
Camera linkage
Link1
Link2
Link3
Link4
Link2+3
2) When a signal is input to the TRIGGER 1 - 4 terminal, the camera image corresponding to this (screen
set in Camera linkage ) is displayed. When the signal is terminated, the display returns to the previous
screen (4 seconds later for Link 2 and 3).
※ The image can be switched even with the TRIGGER(Link) 1 - 4 signal image displayed but the display will
return to the previous screen upon the signal being terminated.
① Default condition when shipped
▲
Camera4
▼
Former screen
▲
AV2
▼
Former screen
② When Link 1 is set to 4 screen display in the Camera linkage settings
▲
Camera4
▼
Former screen
Camera1
Camera2
Camera3
Camera4
3 Screen
TRIGGER 1 signal: Input
TRIGGER 2 signal: Input
Camera1 Camera4
Camera2 Camera3
TRIGGER 1 signal: Input
Camera linkage
Link1 Camera1
Camera1
Link2 Camera2
2 Screen
Link3 Camera3
3 Screen
Link4 Camera4
4 Screen
Link2+3 3 Screen
▲
Camera1
▼
TRIGGER 1 signal: Off
▲
Camera2
▼
TRIGGER 2 signal: Off
※AV2 screen 4 seconds later
TRIGGER 1 signal: Off
▲
Camera4
▼
▲
AV2
▼
▲
Camera4
▼
21