Clarion EA-2182E Owner's Manual And Installation Instructions page 13

4) Video signal when split screen
Full screen(AV1/AV2): Automatically selected NTSC or PAL.
Split screen: Select manually.
① Select Video signal in the General menu with the ▲／▼ buttons and press the ENT(VOL) button (OK
or ▶ button on the remote control).
② Select NTSC or PAL with the ▲／▼ buttons and press the ENT(VOL) button (OK or ▶ button on the
remote control).
※ You can not use both NTSC and PAL signals, in the one split screen.
5) To initial settings
① Select To initial settings in the General menu with the ▲／▼ buttons and press the ENT(VOL) button
(OK or ▶ button on the remote control).
② Select Reset with the ▲／▼ buttons and press the ENT(VOL) button (OK or ▶ button on the re-
mote control) to automatically turn the power OFF and initialize the system to the default state when
shipped.
※ With Reset selected, initialization will not carried out even if the menu screen disappears when the
buttons are not pressed for 5 seconds.
14
General
Volume 5
Language English
Switch time OFF
Video signal NTSC
To initial settings
General
Volume 5
Language English
Switch time OFF
Video system NTSC
To initial settings
General
Volume 5
Language English
Switch time OFF
Video signal NTSC NTSC
To initial settings
PAL
General
Volume 5
Language English
Reset settings to factory default.
Switch time OFF
Reset
Video system NTSC
Cancel
To initial settings