Clarion EA-2182E Owner's Manual And Installation Instructions page 17

4) Up/down, Left/Right adjustment (adjust the bumper position of the car)
① Select Up/down in the Marker menu and press the ENT(VOL) button (OK or ▶ button on the remote
control).
② Adjust the V (vertical movement) value with the ▲／▼ buttons (▲: Up, ▼: Down) and press the
ENT(VOL) button (OK or ▶ button on the remote control). (V= −10∼＋10, Default setting: V=0)
① Select L/R in the Marker menu and press the ENT(VOL) button.
② Adjust the H (horizontal movement) value with the ▲／▼ buttons (▲: Right, ▼: Left) and press the
ENT(VOL) button (OK or ▶ button on the remote control). (H = −10∼＋10, Default setting: H=0)
※ If there is no button operation, set up screen disappears even during set up process.
Camera Nomal/Mirror mode setting
① Select Camera 1 - 4 or Sub. in the Normal/Mirror menu and press the ENT(VOL) button (OK or ▶
button on the remote control).
※ The sub-display screen is displayed only when the CJ-7600 monitor is connected.
② Select Normal or Mirror with the ▲／▼ buttons and press the ENT(VOL) button (OK or ▶ button on
the remote control) to invert the screen left to right.
※ It is set Normal mode from the factory.
Normal/Mirror
Camera1
Camera2
Camera3
Camera4
Sub
18
Marker
Marker ON
Camera type １１８°
Marker type Type１
Up/down ０
L/R ０
Marker
Marker ON
Camera type １１８°
Marker type Type１
Up/down ０
L/R ０
Normal
Normal
Normal
Normal
Normal
Ｖ ： ＋１０
Ｈ ： ０
Ｖ ： ０
Ｈ ： ＋１０
Normal/Mirror
Camera1 Normal Normal
Camera2 Normal
Mirror
Camera3 Normal
Camera4 Normal
Sub Normal