Clarion EA-2182E Owner's Manual And Installation Instructions page 12

General
1) Volume control (Applicable only when CJ-7600 is connected)
① Select Volume in the General menu and press the ENT(VOL) button (OK or ▶ button on the remote
control).
② Press the ▲／▼ buttons to adjust the volume.
※ The volume can be adjusted between 0 and 15. The initial setting is 5.
General
Volume
Language
Switch time
Video system
To initial settings
2) Language settings
① Select Language in the General menu with the ▲／▼ buttons and press the ENT(VOL) button (OK or
▶ button on the remote control).
② Select 日本語/English/Français/Español/Italiano/Deutsch/Svenska with the ▲／▼ buttons and press
the ENT(VOL) button (OK or ▶ button on the remote control) to change the language.
※ It is set English from the factory.
General
Volume
Language
Switch time
Video system
To initial settings
3) Switching time settings (Automatic screen switching)
The images of Camera 1 - 4 can be automatically switched in full screen.
① Select Switch time in the General menu with the ▲／▼ buttons and press the ENT(VOL) button (OK
or ▶ button on the remote control).
② Select with the ▲／▼ buttons, and press the ENT(VOL) button (OK or ▶ button on the remote control)
to set the time.
※ Time can be selected from OFF/1 - 5 sec. (in 1 sec unit). The default setting when shipped is OFF .
※ When the screen switching time is set between 1 to 5 sec., it is not possible to switch to a split screen
display.
General
Volume
Language
Switch time
Video system
To initial settings
5
English
OFF
NTSC
5
English
OFF
NTSC
5
English
OFF
NTSC
General
Volume 5
Language English
Switch time OFF
Video system NTSC
To initial settings
General
Volume 5
Language 日本語 English
Switch time English OFF
Video system Français NTSC
Español
To initial settings
▼
General
Volume 5
Language English
Switch time OFF ON
Video system NTSC 1sec.
To initial settings 2sec.
3sec.
▼
13