Driving Position Memory System - Acura mdx 2016 Owner's Manual

Driving Position Memory System

You can store two driver's seat (except for power lumbar), steering wheel and door
mirror positions with the driving position memory system.
When you unlock and open the driver's door with a remote transmitter, or keyless
access system, the seat and door mirrors adjust automatically to one of the two
preset positions.
The steering wheel will move to the stored position when you set the power mode
to ACCESSORY.
The MID shows you which remote transmitter you used to unlock the vehicle when
you enter.
• DRIVER 1 transmitter is linked to memory button 1.
• DRIVER 2 transmitter is linked to memory button 2.
DRIVER 1 DRIVER 2
uuOperating the Switches Around the Steering WheeluDriving Position Memory System
The driver's seat moves rearward and steering
wheel fully up depending on the set seating
position once you
• Stop the vehicle.
• Put the transmission in P . (
• Turn the engine off.
• Then open the driver's door.
Once the power mode is in the ACCESSORY
position, the driver's seat driver's seat and
steering wheel moves to the DRIVER 1 or 2
preset position.
1Driving Position Memory System
Using the audio/information screen or MID, you can
disable the automatic seat, steering wheel and door
mirrors adjustment function.
2 Customized Features P. 117, 263
The driver's seat easy exit feature:
•
Can be turned ON/OFF.
2 Customized Features P. 117
System Operation
The system will not operate if:
•
The vehicle speed is above 3 mph (5 km/h).
•
Either memory position button is pressed while the
seat or steering wheel is in motion.
•
The seat or steering wheel position is adjusted
while in operation.
•
The memory 1 or 2 position is set fully to the rear.
Continued 169