Acura mdx 2016 Owner's Manual page 404

■
VSA® On and Off
VSA® OFF Indicator
uuWhen DrivinguVehicle Stability Assist (VSA®), aka Electronic Stability Control (ESC), System
This button is on the driver side control panel.
To partially turn the VSA features on and off,
press and hold it until you hear a beep.
The traction control stops fully functioning,
allowing the wheels to spin more freely at low
speed. The VSA® OFF indicator will also come
on.
To turn it on again, press the
button until you hear a beep.
VSA® is turned on every time you start the
engine, even if you turned it off the last time
you drove the vehicle.
1Vehicle Stability Assist (VSA®), aka Electronic Stability Control
(ESC), System
With the
normal braking and cornering ability, but VSA®
traction and stability enhancement becomes less
effective.
In certain unusual conditions when your vehicle gets
stuck in shallow mud or fresh snow, it may be easier
to free it with the
When the
(VSA® OFF)
function becomes less effective. This allows for the
wheels to spin more freely at low speed. You should
only attempt to free your vehicle with the
pressed if you are not able to free it without.
Immediately after freeing your vehicle, be sure to
press the
driving your vehicle with the
(indicator on).
You may hear a motor sound coming from the
engine compartment while system checks are being
performed immediately after starting the engine or
while driving. This is normal.
button pressed, your vehicle will have
button pressed.
button is pressed, the traction control
button
button again. We do not recommend
button pressed
403