TurboChef Speedcook Use & Care Manual page 17

The Speedcook Oven
Note: The pre-programmed Speedcook
settings, which have been developed
through extensive testing by our staff of
professional chefs, may differ in time and
temperature from what your original recipe
indicates.
Once your specifi cations are set, the oven will
display the temperature and time needed to
cook your food item. Follow these steps to
preheat the oven and cook your food:
1. Tap Preheat to begin the preheat cycle.
2. Preheat progress is displayed on the
status bar and LED light ring. Preheating
will take 8-14 minutes. The oven will
chime when preheating is complete. The
preheating progress will be displayed on
a bar near the bottom of the screen.
The LED light ring, beside the touch
screen, is also synced with the progress
meter to show preheat status.
3. Once preheating is complete, place the
food in the oven.
4. Tap Start to begin the cook cycle. The
oven automatically begins counting
down the cook time once Start is
tapped. No buttons are visible and no
further modifi cations are possible until
the 80% complete point, unless you
open the oven door.
CAUTION
Before beginning a cook cycle, make sure
your food item has been placed in the
oven. Except for the preheat cycle, the
oven should not be run with an empty
cook cavity.
Note: The oven door must be completely
closed before oven will initiate a cook cycle.
Note: At any time during preparation,
preheating, and cooking, tapping Cancel or
Speedcook Oven will stop all activity and
return you to the main Speedcook menu.
17