Changing The Ip Address Settings - Ricoh Sp 213Nw Setup Manual

Press the [ ] or [ ] key to select [Configuration Page], and then press the [
Press [Yes] in the confirmation screen.
Check the IP address on the configuration page.
The address appears under Network Settings.
If the IPv4 address is not automatically assigned by the DHCP server, the machine automati-
cally selects an unused IPv4 address starting with "169.254.xxx.xxx" (Auto IP function).

Changing the IP Address Settings

To configure the IP address manually, it is necessary to specify the IP address-related settings.
For details, see page 19 "3.Appendix".
SP 213Nw
Use Smart Organizing Monitor to connect the machine to the network. Install Smart Organ-
izing Monitor first on a computer on the same network.
For details, see "Installing the Driver and Software", User Guide .
SP 213SNw/SP 213SFNw
Configure network settings using the control panel.
DCT059
16
] key.