Ricoh Sp 213Nw Setup Manual page 20

Configuring the Machine's IPv4 Address Manually
Press the [
Press the [ ] or [ ] key to select [Network Settings], and then press the [
Press the [ ] or [ ] key to select [IPv4 Configuration], and then press the [
Press the [ ] or [ ] key to select [DHCP], and then press the [
Press the [ ] or [ ] key to select [Inactive], and then press the [
Press the [ ] or [ ] key to select [IP Address] , and then press the [
Enter the machine's IPv4 address using the number keys.
Press the [ ] or [ ] key to move between fields.
Enter the values in all fields, and then press the [
Specify the subnet mask and default gateway address as required in accordance with the
network environment.
Press the [
The specified setting is applied.
• For details about configuring the IPv6 address, see the User Guide .
• You cannot configure the network settings while the machine is operating (printing, receiving a
fax, etc.). Correspondingly, the machine cannot receive print jobs and faxes while the network
settings are being configured (after clicking [Network Settings]).
] key.
] key to restart the machine.
] key.
20
] key.
] key.
] key.
] key.
] key.