Ricoh Sp 213Nw Setup Manual page 10

• Do not connect the USB cable to the machine until prompted to do so in the installer window.
If you connect the machine to the computer before the prompt appears, the machine will be
identified prematurely by the computer and you will be unable to install the driver correctly.
Make sure the machine is off.
Turn on the power of the computer.
Insert the CD-ROM into the CD-ROM drive.
Select a language and product for the interface, and then click [OK].
Click [USB Quick Install].
If WPS cannot be used with SP 213Nw, click [Smart Organizing Monitor].
CXP122
CXP066
DCT045
10