General Safety Rules; Special Safety Rules - Ryobi RFT254N Operator's Manual

Your product has been engineered and manufactured to
Ryobi's high standard for dependability, ease of operation,
and operator safety. Properly cared for, it will give you
years of rugged, trouble-free performance.
To avoid serious personal injury, do not attempt to use
this product until you read thoroughly and understand
completely the operator's manual. Failure to comply
may result in accidents involving electric shock, fire,
and/or serious personal injury. Save this operator's
manual and review frequently for continuing safe
operation and instructing others who may use this
product.
The product is not designed for use with any other
Expand-It or similar type attachment. Only use the Pro
Cut attachment supplied with this engine. Using other
attachments will void your warranty.
READ ALL INSTRUCTIONS

GENERAL SAFETY RULES

■ Do not allow children or untrained individuals to use
this product.
■ Never start or run the engine inside a closed or poorly
ventilated area; breathing exhaust fumes can kill.
■ Clear the work area before each use. Remove all
objects, such as rocks, broken glass, nails, wire that
can lead to accidents.
■ Always wear eye protection with side shields marked to
comply with standards, along with hearing protection.
Failure to do so could result in objects being thrown
into your eyes and other possible serious injuries.
■ Wear head and eye protection to prevent injury from
falling debris.
■ Wear heavy, long trousers, boots and gloves. Do not
wear loose fitting clothing, shorts, jewelry of any kind,
or go barefoot.
■ Secure long hair so it is above shoulder level to
prevent entanglement in any moving parts.
■ Keep all bystanders, children, and pets at least 15 m
away.
■ Do not operate this unit when you are tired, ill, or
under the influence of alcohol, drugs, or medication.
■ Do not operate in poor lighting.
■ Keep firm footing and balance. Do not overreach.
Overreaching can result in loss of balance or exposure
to hot surfaces.
WARNING
WARNING
ENGLISH
■ Keep all parts of your body away from any moving
part.
■ Do not touch area around the exhaust, silencer or
engine of the unit; these parts get hot during operation.
■ Always stop the engine and remove the spark plug
wire before refuelling, cleaning, maintenance or
storage.
■ Inspect the unit before each use for loose fasteners,
fuel leaks, etc.
■ Replace any damaged parts before use.
■ Check for and tighten any loose parts.
■ Mix and store fuel in a container approved for fuel.
■ Mix fuel outdoors where there are no sparks or flames.
Wipe up any fuel spillage. Move 9 m away from
refuelling site before starting engine.
■ Stop the engine and allow to cool before refuelling or
storing the unit.
■ Remove all debris from the work area before
operating.
■ Keep bystanders (especially children) away from the
working area by 15 m.
■ Allow the engine to cool; empty the fuel tank and
secure the unit from moving before transporting in a
vehicle.
■ Wear your protective equipment and observe all
safety instructions. For units equipped with a clutch,
be sure the cutting attachment stops turning when the
engine idles. When the unit is turned off make sure
the cutting attachment has stopped before the unit is
set down.
■ Heavy protective clothing may increase operator
fatigue, which could lead to heat stroke. During
weather that is hot and humid, heavy work should be
scheduled for early morning or late afternoon hours
when temperatures are cooler.
Inspection after dropping or other impacts:
Thoroughly inspect the product and identify any
affections or damage with it. Any part that is damaged
should be properly repaired or replaced by an
authorised service centre.

SPECIAL SAFETY RULES

TRIMMER
■ Replace string head if cracked, chipped, or damaged
in any way. Make sure the trimmer head is properly
installed and securely fastened. Failure to do so can
cause serious injury.
■ Make sure all guards, deflectors and handles are
1
WARNING