Key To Symbols; Symbols - Husqvarna Rider 213 C Owner's Manual

Symbols

These symbols are on the machine and in the instructions.
WARNING! Careless or incorrect use can
result in serious or fatal injury to the
operator or others.
Please read the operator's manual
carefully and make sure you understand
the instructions before using the machine.
Always wear:
• Approved hearing protection
This product is in accordance with
applicable EC directives.
Neutral
Fast
Slow
Stop the engine.
Battery
Choke.
Fuel
Oil level
Cutting height
Backwards
Forwards
Ignition
2 –
English

KEY TO SYMBOLS

Hydrostatic freewheel
Watch your hands and other body parts
so they do not get caught and crushed
between the belt and belt pulley.
Warning: rotating parts. Keep hands and
feet clear.
Parking brake
Brake
Noise emission to the environment
according to the European Community's
Directive. The machine's emission is
specified in the Technical data chapter and
on the label.
Rotary blades Keep hands and feet
away from under the hood when the
engine is running
Never drive across a slope
Never use the machine if persons,
especially children, or animals, are in the
vicinity
Never carry passengers on the machine
or equipment
Drive very slowly if no cutting unit is fitted
Before and during reversing procedures,
look behind you.
>10