Technical Data - Husqvarna Rider 213 C Owner's Manual

Note 1: The power rating of the engine indicated is the average net output (at specified rpm) of a typical production engine for the
engine model measured to SAE standard J1349/ISO1585. Mass production engines may differ from this value. Actual power
output for the engine installed on the final machine will depend on the operating speed, environmental conditions and other values.
Note 2: Noise emissions in the environment measured as sound power (L
Note 3: Noise pressure level according to EN 836. Reported data for noise pressure level has a typical statistical dispersion
(standard deviation) of 1.2 dB(A).
Note 4: Vibration level according to EN 836. Reported data for vibration level has a typical statistical dispersion (standard deviation)
2
of 0.2 m/s (steering wheel) and 0.8 m/s
Cutting unit
Cutting width, cm/inch
Cutting heights, 7 positions, mm/inch
Blade length, mm/inch
Weight
Cutter
Article number
IMPORTANT INFORMATION When the service life of this product has been served and it is no longer used it should be returned
to the dealer or to an applicable station for recycling.
IMPORTANT INFORMATION We reserve the right to change specifications and designs without prior notice so as to implement
improvements. Note that no legal claims are valid on the basis of information in this manual. Use only genuine parts for repairs.
The warranty is not valid if non genuine parts are used.

TECHNICAL DATA

2
(seat).
Combi 94
94/37
25-75/0.98-2.95
358/14.09
35/77
5796525-10
) in conformity with EC directive 2000/14/EC.
WA
Combi 103
103 / 41
25-75/0.98-2.95
388/15.28
43/95
5041882-10
– 33
English