Table of Contents
Advertisement
3.7 System Info
You can use this menu to get the operational information of this camera:
...
After you selected System Info, a sub-menu will appear. There are 4 sub-menus available here:
Detailed descriptions of every setting will be given below.
3.7.1 Camera Information
Camera information allows you to set the name and administrator's password of this camera.
The descriptions of every setting in this menu will be given below:
Camera Name
Password
Confirm Password
Click Apply to save settings and make the new settings take effect.
Please specify the name of this IP Camera here. This can be
used to identify your camera on the network when you have more
than one IP camera in the same network.
Default name begins with ICA-M220/M220W. You can modify the
name to the one you can remember and meaningful to you, but
never give all IP cameras in the same network with same name.
Please specify user name admin's password here. (The one you
need when you log onto web management interface and use
'admin' as user name.
Please input the same password again, to make sure there's no
typo.
56
Advertisement
Table of Contents
