Motion Detection Setting; Motion Detection - Planet Networking & Communication ICA-M220 User Manual

Wired/wireless mega-pixel cmos pt ip camera

Table of Contents

3.6 Motion Detection Setting

When you wish to use this camera to monitor the activities, motion detection function will be very

useful. Camera will detect the motion in captured image, and take a snapshot when motion is

detected. So you can use this camera to keep the safety of the belongings you have.

To use motion detection, click the following link from the top of menu:

After you selected Motion Detection, a sub-menu will appear. There are 5 sub-menus available

here:

Detailed descriptions of every setting will be given below.

You can use this menu to setup basic motion detection settings:

The descriptions of every setting in this menu will be given below:

Enable Motion Detection

Motion Detection Interval

Recording Time

Select Enable to enable motion detection, and select Disable to

disable this function.

Select the time interval between two motions from dropdown

menu. When a motion is detected, camera will not detect any

motion again within the time interval you specified here. Available

options are from 0 second (always detect new motion) to 60

seconds.

Select the duration you wish this camera to record image when a

motion is detected from dropdown menu. Available options are 1,

2, 3, 4, and 5 (seconds).

Table of Contents

Ica-m220w