Table of Contents
Advertisement
Provider
Host Name
User Name
Password
Click Apply to save settings and make the new settings take effect.
3.5.4 UPnP
When UPnP function is activated, all UPnP-compatible computers / network devices will be able to
discover this IP camera automatically (only those in the same local network).
This function is useful and you don't have to remember the IP address of this IP camera. Simply
open 'Network neighbor' and it's there!
The descriptions of every setting in this menu will be given below:
Enable UPnP
Click Apply to save settings and make the new settings take effect.
After UPnP function is activated, a popup message will appear:
Select dynamic DNS service provider here. Only dyndns.org is
available currently.
Input dynamic DNS host name here.
Input dynamic DNS user name here, must be the same as the
one you applied on dyndns.org.
Input dynamic DNS password here, must be the same as the one
you applied on dyndns.org.
Select Enable to activate UPnP function of this IP camera, select
Disable to disable it.
W
48
Advertisement
Table of Contents
