Sending File Type
Send snapshot file to FTP
Send snapshot file to
E-Mail
Send snapshot file to SD
Card
Click Apply to save settings and make the new settings take effect.
3.6.2 Motion Region
You can define the motion detection region within the image that camera captures, so this camera
will ignore motions which are not covered by the motion region setting, and reduce the chances of
false alarm.
Select the file type that will be saved when a motion is detected.
Select JPEG and a still picture in JPEG format will be saved; and
select AVI to save a motion video clip.
Select Enable to send the saved file to appointed FTP server
when a motion is detected, select' Disable' to disable this function.
You have to configure FTP server parameters in
FTP Configuration menu first, so this function will take effect
(see below).
Select Enable to send the saved file to appointed E-mail address
when a motion is detected, select Disable to disable this function.
You have to configure mail server parameters in 'FTP
Configuration' menu first, so this function will take effect (see
below).
Select Enable to send the saved file to SD card when a motion is
detected, select Disable to disable this function. You have to
insert a working SD card into the SD slot of this camera first, so
this function will take effect.
51