Getting Started - Amped Wireless HIGHPOWER AC1750 Setup Manual

GETTING STARTED

a) Attach the included antennas to the antenna ports on the Range Extender / Bridge.
b) Power on the Range Extender / Bridge by attaching either the power adapter to the Range Extender /
Bridge and plugging in the other end into a power outlet or attaching a PoE Ethernet cable to the
LAN1 port on the side panel and the other end to an active PoE switch.
c) Connect to the Range Extender / Bridge with your computer by attaching an Ethernet cable to the
LAN2 port on the side panel.