Amped Wireless HIGHPOWER AC1750 Setup Manual page 38

Attach Antennas, Power On & Connect to your Computer
a) Attach the included antennas to the antenna ports on the WDS-Bridge.
b) Power on the WDS-Bridge by attaching either the power adapter to the Bridge and plugging in the
other end into a power outlet or attaching a PoE Ethernet cable to the LAN1 port on the side panel
and the other end to an active PoE switch.
c) Connect to the WDS-Bridge with your computer by attaching an Ethernet cable to the LAN2 port on
the side panel.