Table of Contents
Advertisement
Basic Setup Wizard
Confirm that Bridge Mode is the mode that you wish to configure
and Click
Next
to begin.
Scan for a Source Network to Connect to and Bridge
Click
Scan
to find available networks. Select the Source Network
that you wish to connect to and bridge.
Note:
It is recommended that you select a Source Network with a
signal strength greater than 70% for the most reliable connection.
Poor signal connections may cause slow speeds or dropped
connections.
Click
Next
to continue.
Note:
If you do not see your desired Source Network, click Scan
again, or move the Network Bridge to another location and Scan
again as the Bridge may be out of range.
Hide quick links:
Advertisement
Table of Contents
