Amped Wireless SR300 User Manual
High power wireless-n range extender
Hide thumbs
Also See for SR300:
- Specifications (2 pages) ,
- User manual (52 pages) ,
- Setup manual (2 pages)
Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Amped Wireless SR300
Summary of Contents for Amped Wireless SR300
- Page 1 User’s Guide High Power Wireless-N Range Extender SR300 Rev 1.1...
-
Page 2: Table Of Contents
SR300 USER’S GUIDE CONTENTS SMART FEATURES ..........25 INTRODUCTION ..........2 Access Schedule ........... 26 GETTING STARTED ..........3 User Access Control ..........27 Package Contents ..........3 Wi-Fi Coverage Controls ........28 LED Indicators ............4 IP SETTINGS ............29 Back Panel Description .......... -
Page 3: Introduction
USER’S GUIDE INTRODUCTION Thank you for purchasing this Amped Wireless product. At Amped Wireless we strive to provide you with the highest quality products through innovation and advanced technology. We pride ourselves on delivering products that outperform the competition and go beyond your expectations. If you have any questions please feel free to contact us. -
Page 4: Getting Started
SR300 USER’S GUIDE GETTING STARTED Package Contents Check to make sure you have all the contents within your package: High Power Wi-Fi Range Extender Two Detachable 3dBi High Gain Antennas Setup Guide CD: User’s Manual, Installation Video ... -
Page 5: Led Indicators
SR300 USER’S GUIDE LED Indicators WPS: Wi-Fi Protected Setup activity. When the WPS mode is activated the WPS LED blinks as it awaits a connection. Wired Connections: Shows the connection status and data activity of each wired LAN port. Wireless Activity: Blinks rapidly when wireless data traffic is passing through the Range Extender. -
Page 6: Back Panel Description
SR300 USER’S GUIDE Back Panel Description Antenna Connectors: RJ-SMA antenna connectors. Compatible with all antennas with RP-SMA connectors. Upgradable to high gain antennas for more range. Reset: Push down once to reboot the Range Extender. Hold down for 5-10 seconds to reset the device back to factory settings. -
Page 7: Setup Guide
SR300 USER’S GUIDE SETUP GUIDE Find a Setup Location The location of where you install the Range Extender is very important to how it will function. The optimal setup location should be somewhere no more than halfway between your Wi-Fi router and your Wi-Fi dead... - Page 8 SR300 USER’S GUIDE Connect your PC or Tablet to the Range Extender Attach the two included antennas. b. Attach the Power Adapter to the Range Extender’s Power Port and an available power outlet. Connect your PC or Tablet to the Range Extender’s Wi-Fi network:...
- Page 9 SR300 USER’S GUIDE Open your Web Browser to Access the Setup Wizard Open your web browser. b. Type in: http://setup.ampedwireless.com into the web address bar If the web menu fails to open, type in the following IP address into your web address bar: http://192.168.1.240...
-
Page 10: Welcome To The Dashboard
SR300 USER’S GUIDE Welcome to the Dashboard The Dashboard will provide you with the current status of the Range Extender. Click SCAN to find an available network to extend. The diagram on this page displays the terms used to describe: 1) The network you are trying to extend (Home Network). -
Page 11: Scan For A Home Network To Extend
SR300 USER’S GUIDE Scan for a Home Network to Extend Highlight and select the Wi-Fi network that you wish to extend and click Next to continue. Check that your Wi- Fi Network has a signal strength of 70% or greater. -
Page 12: Connecting To A Secure Network
SR300 USER’S GUIDE Connecting to a Secure Network If the Wi-Fi network you are trying to extend has Wi-Fi security enabled, you will be prompted to enter a security key. If you did not select a secure network, you will not see this page. -
Page 13: Extended Network Settings
SR300 USER’S GUIDE Extended Network Settings The default SSID of the Range Extender is “Amped_Wireless” If you choose to "Clone" the settings from your Home Network, the wizard will copy the SSID and security key of your Home Network. The SSID of the Extended Network will have a "_RE" at the end of its name. - Page 14 SR300 USER’S GUIDE Connection Check DO NOT LEAVE OR REFRESH THIS PAGE Allow the countdown to complete and the Wizard will automatically redirect you to the next step.
-
Page 15: Connect To The New Extended Network
SR300 USER’S GUIDE Connect to the new Extended Network During the countdown process, the Range Extender will reboot and disconnect the Wi-Fi connection. At this point, you will need to reconnect your PC or tablet to the new Extended Network. Follow the instructions on the screen to connect to the Extended Network. -
Page 16: Setup Summary
Extender settings are saved and can be safely powered off for relocation. You may also attach any wired network devices to the wired ports on the back of the Range Extender. If you experience any problems during this process please contact Amped Wireless Elite Support at 888-573-8820. - Page 17 SR300 USER’S GUIDE If the Home/Office Network connection fails try the following… Check to see that your Home Network security settings are correct. b. Check on the SCAN page that your Home Network is showing a signal of 70% or greater. If not, move the Range Extender closer to your Home Network router and try again.
-
Page 18: Wi-Fi Settings
SR300 USER’S GUIDE WI-FI SETTINGS Home Network Settings The Home Network Settings page allows you to adjust settings for your Home Network connection. These settings are for adjusting the Range Extender after you have already gone through the Wizard and wish to... - Page 19 SR300 USER’S GUIDE Home Network SSID: Manually enter the Identification name of the Home Network you wish to connect to. Channel Number: Enter the channel number of the Home Network. If the channel number does not match, a connection will not be established.
-
Page 20: Extended Network Settings
SR300 USER’S GUIDE Extended Network Settings The Extended Network Settings page allows you to adjust settings for your Extended Network. Band: Allows you to setup access under a specific combination of Wi-Fi speed standards. Broadcast SSID: Selecting Disable Broadcast SSID will hide the visibility of the Range Extender’s SSID. - Page 21 SR300 USER’S GUIDE Guest Network Click “Enable” to create a Guest Network. Guest Networks provide a separate Wi-Fi network, with unique settings for users to connect to. SSID: This is the name of your Guest Network. Data Rate: You can restrict access to the Guest Network by setting a lower bandwidth by changing the band (i.e.
-
Page 22: Security
If you are using the Multiple AP/SSID feature, you will be able to adjust the security settings for your additional SSIDs here as well. For more information on the differences between the types of Wi-Fi security available, please visit the Learning Center of the Amped Wireless website: www.ampedwireless.com... - Page 23 SR300 USER’S GUIDE Wi-Fi Settings: Wi-Fi Protected Setup (WPS) WPS is a Wi-Fi feature created to make Wi-Fi setup simple and easy. Some Wi-Fi routers and adapters support this feature with varying names (i.e. one touch setup or WPS). You may enable WPS setup here by selecting the type of WPS setup you wish to use.
-
Page 24: Advanced Settings
SR300 USER’S GUIDE Wi-Fi Settings: Advanced Settings It is recommended that only experts in Wi-Fi configuration adjust the advanced Wi-Fi settings for the Range Extender. These settings allow you to control the details of your Wi-Fi network configuration. Here are a few definitions on some settings. - Page 25 SR300 USER’S GUIDE Preamble Type: Defines the length of the Cyclic Redundancy Check for communication between the Range Extender and roaming Wi-Fi users. IAPP: Inter-Access Point Protocol STBC: Space Time Block Coding improves reception by coding the data stream in blocks.
-
Page 26: Smart Features
SR300 USER’S GUIDE SMART FEATURES The Range Extender provides your Extended Network with Smart Features that help to provide convenience and protection for your Extended Network. Smart Features allow you to control access to your Extended Network through on/off schedules, specific user authorizations, as well as Wi-Fi coverage controls for your Extended Network. -
Page 27: Access Schedule
SR300 USER’S GUIDE Wi-Fi Settings: Access Schedule You can set a schedule for when your Wi-Fi is enabled or disabled (both Home Network and the Extended Network) through the Access Schedule feature. To do Enable Access Schedule. b. Select which days you wish for your Wi-Fi to be available. -
Page 28: User Access Control
SR300 USER’S GUIDE Wi-Fi Settings: User Access Control User Access allows you to deny access or allow access to specific users connecting wirelessly to the Extended Network. Each networking device has a unique address called a MAC address (a 12 digit hex number). -
Page 29: Wi-Fi Coverage Controls
SR300 USER’S GUIDE Wi-Fi Settings: Wi-Fi Coverage Controls Adjust the output power of the Range Extender to control the coverage distance of your Extended Wi-Fi Network. For a smaller coverage area you can select a lower output power. For the maximum Wi-Fi coverage select the 100% selection. -
Page 30: Ip Settings
SR300 USER’S GUIDE IP SETTINGS IP Address: The IP address of the Range Extender. Subnet Mask: The subnet of the Range Extender. Default Gateway: The access point to another network, normally the Range Extender or your router. DHCP: The Range Extender includes a complex AUTO DHCP feature to help manage the IP addresses within your Extended network and with your Home Network. - Page 31 SR300 USER’S GUIDE DHCP Client Range: The range of IP addresses the Range Extender’s DHCP server will assign to users and devices connecting to the Range Extender. Static DHCP: You may set a static IP address within your DHCP network. The Range Extender will track the device via its MAC address and assign it a pre-defined IP address each time the device logs into the network.
-
Page 32: Management Features
SR300 USER’S GUIDE MANAGEMENT FEATURES The Management features on the Range Extender allow you to view the status of your Range Extender and adjust other settings such as your System Clock, Passwords, and Firmware Upgrades among other administrative functions. -
Page 33: Device Status
SR300 USER’S GUIDE Management: Device Status The Device Status provides you with a snapshot of your Range Extender’s current connections and settings. System Information: This section provides you with information on the version and build time of your firmware. This is used to help our support department determine what firmware version your device is running. - Page 34 SR300 USER’S GUIDE Connection State: The Connection State will say "Connected" when there are no problems with the connection to your Home Network. If the Connection State shows "Waiting for Keys" then the WPA/WPA2 security key you entered is incorrect.
-
Page 35: Statistics
SR300 USER’S GUIDE Management: Statistics These statistics show the data activity for each network connection. Connection to Home Network: This statistics shows the data activity for all upload and download data between the Home Network and the Range Extender. Extended Wi-Fi Network: These statistics shows all data activity for all users connected wirelessly to the Range Extender. -
Page 36: System Clock
SR300 USER’S GUIDE Management: System Clock Maintain the internal clock for the Range Extender by syncing with your computer’s time. Your system clock settings need to be accurate in order for logs and Wi-Fi access schedules to work correctly. -
Page 37: System Logs
System Logs are useful for viewing the activity and history of the Range Extender. The System Logs are also used by Amped Wireless techs to help troubleshoot your Range Extender when needed. It is recommended that you enable all logs in the event that troubleshooting is required. All log entries are... -
Page 38: Upgrade Firmware
USER’S GUIDE Management: Upgrade Firmware Amped Wireless continuously updates the firmware for all products in an effort to constantly improve our products and their user experiences. Check the Downloads page for your product frequently to see if there are any updates. -
Page 39: Save And Reload Settings
SR300 USER’S GUIDE Management: Save and Reload Settings Saving your current settings allows you to back-up your current settings which may be reloaded at a later time. This feature may be useful for testing new features and settings without having to worry about returning to a stable platform. -
Page 40: Password Settings
SR300 USER’S GUIDE Management: Password Settings By default, the Range Extender does not require a password to login to the web menu. If you wish to enable a password to protect unauthorized access to the web menu and Wizard, you may enter one here. -
Page 41: Technical Specifications
SR300 USER’S GUIDE TECHNICAL SPECIFICATIONS Wireless Standard: 802.11n, 802.11b/g Antennas: 2 x Detachable High Gain 3dBi Antennas Frequency Band: 2.4 GHz 2 x Reverse SMA Connector Wireless Speed: 300Mbps (Rx), 300Mbps (Tx) Amplifier: Dual High Power Amplifiers Ports: ... -
Page 42: Default Settings
SR300 USER’S GUIDE DEFAULT SETTINGS The default settings for your Range Extender are listed here. If for some reason you need to return your Range Extender back to default settings, hold down the Reset button on the back panel for 10 seconds. The Range Extender will reset back to factory settings as listed below: IP Address: 192.168.1.240... -
Page 43: Troubleshooting
SR300 USER’S GUIDE TROUBLESHOOTING AND SUPPORT INFORMATION We are here to help. If you have any issues with your Range Extender please contact us. To contact Amped Wireless’ Technical Support use one of the following methods: Phone: 888-573-8820 Email: techsupport@ampedwireless.com Web: www.ampedwireless.com/support... - Page 44 SR300 USER’S GUIDE Troubleshooting The tips in this guide are listed in order of relevance. Try solution (a) before trying solution (b), etc. I entered http://setup.ampedwireless.com and it failed to open the Web Menu. Make sure your computer is connected to the Range Extender’s Wi-Fi network: Amped_Wireless b.
- Page 45 SR300 USER’S GUIDE I cannot connect to my Home Network. I received an error when running the Wizard. Your Home Network may be secured. Double check that you have the correct security key to connect to the Home Network. b. Your Range Extender may be located too far from your Home Network. Run through the Setup Wizard again.
- Page 46 SR300 USER’S GUIDE d. Make sure that your Home Network’s Wi-Fi SSID is broadcasting and not hidden. If your Home Network SSID is hidden, you will need to manually setup the Range Extender through the Wi-Fi Settings > Home Network Settings menu.
- Page 47 SR300 USER’S GUIDE been reestablished by viewing a website. If you do not have a connection, logon to http://setup.ampedwireless.com and configure a new Home Network connection. d. Check to see that your home Wi-Fi router is still on. If it has been turned off please turn it back on. The Range Extender should automatically reconnect to your Home Network within 10 minutes.
- Page 48 SR300 USER’S GUIDE I am connected to a Home Network, however, I do not have Internet Access. The Home Network itself may not have Internet access. Check to see that you have internet access by connecting directly to the Home Network first. If you are able to go online then this is not a problem. If you cannot go online, then the Home Network’s Internet connection must first be resolved.
- Page 49 SR300 USER’S GUIDE I could NEVER log onto the Range Extender Wirelessly. Check that your Wi-Fi adapter supports WPA2 Wi-Fi security. If it does not then you will need to change the Wi-Fi security on the Range Extender. Go to the Web Menu, select Wi-Fi Settings and then Wi-Fi Security.
- Page 50 SR300 USER’S GUIDE router. Once you have it, connect to the Range Extender using an Ethernet cable. Open your web browser and enter the IP address into the address bar. Reset the Range Extender back to default settings and try the Wizard again. To reset the Range Extender back to default settings, push the Reset Button (on the back panel) down for five (5) to ten (10) seconds then let go.
- Page 51 SR300 USER’S GUIDE The range from the Range Extender seems low. Check to see that your Wi-Fi output settings are at 100%. Go to the Web Menu, Wi-Fi Settings and check the Advanced Settings. Make sure the output power is at 100%.
-
Page 52: Warranty / Regulatory Information
The Amped Wireless (A division of Newo Corporation, Inc.) Limited Warranty Warranty Period: The Amped Wireless Limited Warranty is for one (1) year from the date of purchase for new products. Refurbished products carry the Limited Warranty for thirty (30) days after the date of purchase. - Page 53 (b) the product or its software or firmware has been altered or modified, (c) the product has not been used and installed in accordance to Amped Wireless’ instructions, (d) the product has been subjected to misuse, or negligence. Amped Wireless does not guarantee the continued availability of a third party’s service for which this product’s use or operation may require.
- Page 54 Amped Wireless. The bearer of cost related to shipping repaired or replaced product back to the purchaser will be at the sole discretion of Amped Wireless and determined based on the details of each RMA case. Customers outside of the United States of America are responsible for all shipping and handling costs including custom duties, taxes and all other related charges.
- Page 55 USER’S GUIDE Regulatory Information FCC Statement and Declaration: Amped Wireless declares that this device complies with Part 15 of the FCC Rules and Regulations. Operation of this device is subject to the following two (2) conditions: (1) This device may not cause harmful interference (2) This device must accept any interference received, including interference that may cause undesired operation.
- Page 56 SR300 USER’S GUIDE Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Caution and Safety Notices: Any changes or modifications (including the antennas) made to this device that are not expressly approved by the manufacturer may void the user’s authority to operate the equipment.
- Page 57 SR300 USER’S GUIDE Industry Canada Statement: This Class B digital apparatus complies with RSS-210 and ICES-003 of the Industry Canada Rules. Operation of this device is subject to the following two (2) conditions: (1) This device may not cause harmful interference (2) This device must accept any interference received, including interference that may cause undesired operation.
- Page 58 SR300 USER’S GUIDE Déclaration d’Industrie Canada : Cet appareil numérique de classe B est conforme aux réglementations RSS- 210 et ICES-003 d’Industrie Canada. Le fonctionnement de cet appareil est sujet aux deux conditions suivantes: (1) Cet appareil ne peut pas causer de brouillage préjudiciable (2) Cet appareil doit accepter toute interférence reçue, y compris les interférences pouvant provoquer un...
- Page 59 888-573-8820 e-mail techsupport@ampedwireless.com www.ampedwireless.com Amped Wireless A Division of Newo Corporation Copyright © 2013 Amped Wireless / Newo Corporation. All rights reserved. Amped Wireless, Newo Corporation, and the Amped Wireless Logo are registered trademarks or trademarks of Newo Corporation.