Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Ramblewood Green EC2-30
Summary of Contents for Ramblewood Green EC2-30
-
Page 1: User Manual
User Manual Model: EC2-30 Ramblewood Green WWW.RAMBLEWOODGREEN.COM... -
Page 2: General Information
This appliance is designed for domestic household use. The User Manual contains important product safety & installation information. Your safety is of the utmost importance. Please ensure you read this booklet before attempting to install or use the appliance, and contact RambleWood Green if you have any question. Safety Information ... -
Page 3: Specifications
IMPORTANT: The German Shcott ceramic glass is tough; however it is not unbreakable and can be damaged if heavy or sharp objects are placed on top. DO NOT USE THE UNIT IF ITS SURFACE IS BROKEN OR CRACKED. YOU SHOULD CONTACT RAMBLEWOOD GREEN IMMEDIATELY. Specifications Product specifications and Electrical details :... -
Page 4: First Time Use
OPERATION GUIDELINE First Time Use Any film or stickers on the glass surface should be removed before use. You should switch on one cooking zone at a time, for 5 minutes at maximum level. This will help to remove any odor that exists and evaporate any humidity formed after exit factory. -
Page 5: Installation
INSTALLATION The installation and service must be conducted by a qualified technician, in accordance with national & local regulation. Product dimensions and Aperture dimensions: MODEL EC2-30 290mm 510mm 270mm 490mm 53mm Unpacking the appliance When unpacking the appliance please check the following items are contained within the... - Page 6 o Cut a hole in countertop per drawings shown above. IMPORTANT: You must leave clearance of at least 25 mm between the underneath of the unit and any surface below it. Carefully turn the hob upside down and place it on a cushioned mat. ...
- Page 7 This appliance must be wired into a 30 A fused spur outlet, having 3 mm contact separation and placed in an easily accessible position adjacent to the unit. Cable type: EC2-30, H05 RR-F 3 core x 1.5 mm...
-
Page 8: Replacing The Mains Supply Cable
The main terminal block is located on the underside of the hob and terminals are accessible by removing the terminal block cover screw. EC2-30 The cable connections must be in accordance with the diagram located on the bottom of the hob.