Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Ramblewood Green EC2-18
Summary of Contents for Ramblewood Green EC2-18
-
Page 1: User Manual
User Manual EC2-18 Ramblewood Green WWW.RAMBLEWOODGREEN.COM... -
Page 2: General Information
This appliance is designed for domestic household use. This User Manual contains important product safety & installation information. Your safety is of the utmost importance. Please ensure you read this booklet before attempting to install or use the appliance, and contact RambleWood Green if you have any question. Safety Information ... -
Page 3: Specifications
IMPORTANT: The ceramic glass is tough; however it is not unbreakable and can be damaged if heavy or sharp objects are placed on top. DO NOT USE THE UNIT IF ITS SURFACE IS BROKEN OR CRACKED. YOU SHOULD CONTACT RAMBLEWOOD GREEN IMMEDIATELY. Specifications Product specifications and Electrical details:... -
Page 4: First Time Use
OPERATION GUIDELINE First Time Use Any film or stickers on glass surface should be removed before use. You should switch on one cooking zone at a time, for 5 minutes at maximum level. This will help to remove any odor that exists and evaporate any humidity formed after exit factory. -
Page 5: Auto Power Off
Auto Power off For safety the unit will be powered off if user forget to turn it off. Power Setting Max Working Hour After the control stop working, will show “H” residue heat warning for 20 minutes. Timer 1. Press the “Timer” button, display will show “00”. 2. -
Page 6: Cleaning And Maintenance
Cleaning and maintenance Glass surface should be cleaned regularly. IMPORTANT: Clean the unit when power is off & the glass surface is cool. Using the Scraper The scraper should be placed against glass surface at an angle. Residues can be removed by sliding the blade gently. -
Page 7: Installation
INSTALLATION The installation and service must be conducted by a qualified technician, in accordance with national & local regulation. Product dimensions and Aperture dimensions: MODEL EC2-18 290mm 510mm 270mm 490mm 60mm Unpacking the appliance When unpacking the appliance please check the following items are contained within the... - Page 8 o Cut a hole in countertop per drawings shown above. IMPORTANT: You must leave clearance of at least 25 mm between the underneath of the unit and any surface below it. Carefully turn the hob upside down and place it on a cushioned mat. ...
- Page 9 (A) Clip (B) Fixing bracket (C) Screw You should insert a clip (A) into the holes which are located in each corner of the hob. Place the fixing brackets (B) over each hole and clip, and then place a screw (C) through the hole and fixing bracket (B).
-
Page 10: Replacing The Power Supply Cable
This appliance must be wired into a 30 A fused spur outlet, having 3 mm contact separation and placed in an easily accessible position adjacent to the unit. Cable type: EC2-18 220V-240V, 3x14AWG UL Replacing the power supply cable If the power supply cord is damaged, it must be replaced by manufacturer or qualified technician, per national &...