Pairing; Figure 9.3.2.1: Solo Pair Button; Figure 9.3.2.2: Controller Pairing Procedure - 3DR Solo User Manual

9.3

Pairing

As part of the reset procedure, Solo will be un-paired from the Controller. Start by powering off Solo. Use a
paperclip or similar tool to press and hold Solo's Pair button while powering on Solo. (Make sure you feel the Pair
button click down underneath the paperclip to verify you have properly activated the Pair button.) Continue holding
the Pair button for at least 15 seconds.

Figure 9.3.2.1: Solo Pair Button

Bellow the Accessory Port and adjacent to the Pair button is small orange LED Pair indicator light, once this light
starts flashing rapidly (strobing about 5 times per second), you can release the Pair button.

Figure 9.3.2.2: Controller Pairing Procedure

41